Why Won’T My Apple Watch Charge?

What is the red snake of death on the Apple Watch?

What is the Red Snake of Death Error? – The red screen of death error indicates that there is no battery left in your Apple Watch and that you will have to reboot after charging for some time. But here, the problem starts from the very beginning when you turn on the charger and nothing changes.

How do you fix the green snake of Death?

Apple Watch: What to do if you come across the ‘Green Snake of Death’? – Croma Unboxed 1. Charge your Apple Watch: This may sound ironic, considering how the watch won’t charge, but there’s a reason why this may work for you. Your Apple Watch gives you a good 12-17 hours of run-time without showing you a low-battery indicator.

• However, even after your touches zero, it still has some battery to light up your screen and show you the snake error.
• Drain your Apple Watch (mind you, this can take days) before putting it back on charge again.
• This step has helped several get rid of the charging error; however, it is essential to ensure that your Apple Watch is completely out of battery when you do so.2.

Replace your charging cable: Many times, we’re dealing with an old or damaged cable that doesn’t allow the Apple Watch to charge properly. If you’ve been dealing with the Green Snake, it is best to examine your charger and replace it if required before bidding adieu to your Apple Watch.

1. It is also crucial to use only an original Apple Watch charger and do away with any third-party adapters or cables that you may have.3.
2. Switch to a different power outlet: Different gadgets react differently to voltage fluctuations.
3. If your Apple Watch has been acting up, it is best to try switching plug points within your house to see if the problem persists.4.

Clean the back of your Apple Watch: Your Apple Watch uses a magnetic fast charger that clasps onto the back of the dial. Any dirt, dust or debris affecting the panel of your smartwatch can hamper its ability to charge. Clean your watch thoroughly using a microfibre cloth before attempting to plug it in once again.5.

• Don’t let your Apple Watch die: Now, this may sound crazy, but if your Apple Watch has previously recovered from the Green Snake error, it is best not to let it get discharged completely.
• Ensure to charge your device once it flashes the low-battery warning to avoid any chances of it happening again.
• The Green Snake of Death is often an irreversible battery issue, which is why it is best to use your watch cautiously.6.

Get a replacement unit: You don’t have to get disheartened if none of these steps works out for you. If your Apple Watch is brand new and under a warranty period, Apple can replace it on the grounds of faulty hardware. After all, chances are you spent a fortune bringing your dream gadget home.

How do I reset my Apple Watch Green Snake of death?

Fix The Green Snake Of Death On Apple Watch – When the Green Snake is displayed, the Apple Watch doesn’t have any battery to power its screen, sensors, or Bluetooth/GPS transmitters. Just like smartphones, the Apple Watch keeps some battery in reserve to display the Green Snake, which indicates that the watch requires charging.

Users can place their Apple Watch on the magnetic charger to fix this problem. However, the watch won’t turn on until it reaches a certain battery level. Once the battery levels increase, the Apple Watch should boot up normally and be usable again. Under normal circumstances, users can get rid of the Green Screen of Death on the Apple Watch by charging it.

However, if the watch doesn’t turn on even after a few hours, there are other fixes to try. First, check whether the magnetic charging cable that came with the watch is working fine by connecting the charger to another Apple Watch. Additionally, check that the charging brick is working fine, and all cables are connected securely.

It might also be worth repositioning the watch to make sure the magnets align correctly. Apple also recommends removing any plastic wrap from both sides of the charger and cleaning the back of the Apple Watch and magnetic charging cable. Users can also force restart the Apple Watch by pressing the Digital Crown and the side button for at least 10 seconds until the Apple logo appears.

Another fix that seems to have worked for one user (via iPhoneTricks.org ) is depleting the Apple Watch battery all the way until pressing the buttons doesn’t show the green charging snake. Once the watch reaches that point, attaching it to the magnetic charger should reset the battery and charge it.

How long does Apple Watch stay on green snake?

Apple Watch showing green snake but not starting – fix for ‘green snake of death’ Looks like no one’s replied in a while. To start the conversation again, simply This question was asked in these forums but never usefully answered. Just the usual ‘golly, take it to Apple’ — where the battery repair is $79 (about $95 with shipping and taxes).

Here’s a more useful answer: The problem: Apple Watch shows a green snake (“charge me please”) when on the charger but it doesn’t charge or respond — except perhaps by getting very hot when sitting on the charger. People have had this happen to them after installing a new battery, or sometimes just randomly.

It happened to me in June 2020 after installing a new battery bought from iFixit into my original (“series 0”) Apple Watch. The solution: Leave the watch alone until the battery dies completely. That is, until nothing happens when you press the side button — no red snake, no green snake, just a black screen.

It might take a day or two. Then start charging, and let it charge for a long time, such as the officially recommended 2.5 hours. Ta dah! Fixed! One way to tell if this “cure” is working: When it’s NOT working, my watch and charger got really, really hot to the touch. Like REALLY hot — too hot to touch.

But after I let the battery die completely and started charging, the temperature while charging was normal, not hot at all. Note: This solution is findable if you spend a lot of time scratching all over the internet, and ignore all the suggestions that don’t actually work, but I thought it should be here in the forums too.

Apple Watch, watchOS 4 Posted on Jun 24, 2020 12:32 PM I just bought an Apple Watch from someone she said it was purchased a few months ago & when I received it it was working fine & then it died & I can’t get it to turn on. When it’s unplugged it’s showing the red snake when I plug it in it shows the green snake I tried to hold both buttons down for 10 seconds to restart it that isn’t working either.

When I put it on the charger it gets a little hot as well. Any suggestions on what might help The suggested solution (wait until the battery dies completely) hasn’t worked in my case, and I’d been fiddling with that snake of death for about a month, until I figured it our today.

1. I found two new tricks that helped me.
2. First, believe it or not, but it matters into which wall outlet you plug the adapter.
3. It must be related to the different surge protectors that change the wave shape of the current.
4. I’m not sure if charging via laptop is better – i’ve tried that with my two MacBooks (Pro and Air) but eventually got the watch back to life via a wall adapter.

There’s also the second and important peculiarity. After you start charging, your green snake of death may eventually turn into red one (otherwise you are fine – just keep charging). At this point many people either leave it with the red snake on the charger with no result, or try removing the watch from the charger and putting it back again to restore the green snake.

1. It won’t help.
2. Instead you must unplug the charger from the wall adapter (or the laptop, if that’s your choice) and wait for at least 10 seconds – this resets some sort of a charging error that the charger obviously registers.
3. So the procedure would be as follows: 1.
4. Unplug your Apple Watch adapter from the wall outlet, go to another one (preferably on another floor or even in another building) and plug it in there 2.

put your Apple Watch on the charger. You should see the green snake, at least initially 3. check the status in about half an hour, by gently pushing the side button without removing the watch from the charger. If you see the red snake of death again (and the watch becomes really hot), you should basically go back to step 1).I.e.

1. Unplug the wall adapter, move to another outlet and plug it there Sooner or later you you’ll get the green snake stay at your Apple watch, without turning into the red one again.
2. At this point the watch should also become less hot, meaning that some trickle charge has now begun.
3. Now don’t touch it at all.

In 2 to 12 hours, the watch should switch into its normal mode and begin normal charging (which will last much longer the first time). After it’s fully charged and operational, I’d recommend doing full reset via its menu, to decrease the chances of getting that annoying error again.

if the above has helped you, feel free to donate some of the money you’ve just saved to a good cause of your choice 🙂 Page content loaded The suggested solution (wait until the battery dies completely) hasn’t worked in my case, and I’d been fiddling with that snake of death for about a month, until I figured it our today.

I found two new tricks that helped me. First, believe it or not, but it matters into which wall outlet you plug the adapter. It must be related to the different surge protectors that change the wave shape of the current. I’m not sure if charging via laptop is better – i’ve tried that with my two MacBooks (Pro and Air) but eventually got the watch back to life via a wall adapter.

There’s also the second and important peculiarity. After you start charging, your green snake of death may eventually turn into red one (otherwise you are fine – just keep charging). At this point many people either leave it with the red snake on the charger with no result, or try removing the watch from the charger and putting it back again to restore the green snake.

It won’t help. Instead you must unplug the charger from the wall adapter (or the laptop, if that’s your choice) and wait for at least 10 seconds – this resets some sort of a charging error that the charger obviously registers. So the procedure would be as follows: 1.

unplug your Apple Watch adapter from the wall outlet, go to another one (preferably on another floor or even in another building) and plug it in there 2. put your Apple Watch on the charger. You should see the green snake, at least initially 3. check the status in about half an hour, by gently pushing the side button without removing the watch from the charger.

If you see the red snake of death again (and the watch becomes really hot), you should basically go back to step 1).I.e. unplug the wall adapter, move to another outlet and plug it there Sooner or later you you’ll get the green snake stay at your Apple watch, without turning into the red one again.

At this point the watch should also become less hot, meaning that some trickle charge has now begun. Now don’t touch it at all. In 2 to 12 hours, the watch should switch into its normal mode and begin normal charging (which will last much longer the first time). After it’s fully charged and operational, I’d recommend doing full reset via its menu, to decrease the chances of getting that annoying error again.

if the above has helped you, feel free to donate some of the money you’ve just saved to a good cause of your choice 🙂 I just bought an Apple Watch from someone she said it was purchased a few months ago & when I received it it was working fine & then it died & I can’t get it to turn on.

When it’s unplugged it’s showing the red snake when I plug it in it shows the green snake I tried to hold both buttons down for 10 seconds to restart it that isn’t working either. When I put it on the charger it gets a little hot as well. Any suggestions on what might help I had the same problem called apple support the tech said never heard of it, he proceeds to set me up for mail in for my watch series 4.

Total cost without Apple care was 380$ got my new/refurbished watch and it wouldn’t start up another charging over night so I went to my iPhone 6 and tried to sync the watch and it said it was incompatible with the iPhone 6. What! Yes it will not sync cause the watch they sent me had the new OS6 on it and it was incompatible with my iPhone 6.

How long does a green snake last?

Reproduction and Life Cycle – Male rough green snakes court females using a variety of motor patterns, including chin rubbing, tail waving and head jerking. They usually leave the female immediately after breeding occurs. Females reach sexual maturity at 21 to 33 months.

How do you restart a dead Apple Watch?

Restart Apple Watch Select version: watchOS 9 watchOS 8 watchOS 7 watchOS 6 watchOS 5 Modifying this control will update this page automatically

Set up Apple Watch for a family member Apple Watch safety features Accessibility and related settings Restart, erase, recover, restore, and update

If something isn’t working right, try restarting your Apple Watch and its paired iPhone.

Turn off your Apple Watch: Press and hold the side button until the sliders appear, tap, then drag the Power Off slider to the right. Turn on your Apple Watch: Hold down the side button until the Apple logo appears.

Note: You can’t restart your Apple Watch while it’s charging.

Turn off your iPhone: For models with Face ID, press and hold the side button and a volume button, then drag the slider to the right. For models without Face ID, press and hold the side or top button until the slider appears, then drag the slider to the right. With any model, you can also go to Settings > General > Shut Down. Turn on your iPhone: Hold down the side or top button until the Apple logo appears.

If you can’t turn off your Apple Watch or if the problem continues, you may need to force your Apple Watch to restart. Do this only if you’re unable to restart your Apple Watch. To force restart, hold down the side button and the Digital Crown at the same time for at least ten seconds, until the Apple logo appears. Helpful? Thanks for your feedback. : Restart Apple Watch

Why won t my Apple Watch turn on just the red lightning bolt?

The red lightning bolt is on and I cannot get the watch to turn off I tried both ways with the side button and Digital Crown Red lightening bolt means the Watch battery is completely drained. Until you can get it to charge don’t try anything else. The article is the best resource for this situation.

Why is my Apple Watch charging but not turning on?

Your charger isn’t working properly – If you left your watch to charge up and came back to a device that still won’t turn on, your charger may be the culprit. Faulty third-party chargers or even a worn-out one from Apple are worth replacing. There is also the possibility that the outlet you are plugging into isn’t supplying power.

What does squiggly charging line on Apple Watch mean?

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question. apple watch shows image of a squiggly charge cord. Won’t charge or reset. Help. Posted on Oct 8, 2015 8:02 AM 5 replies Question marked as ★ Helpful Jan 16, 2017 12:32 PM in response to DSchaefer My watch does this as well.

Have charged it with different chargers, different cables, my computer, an iPhone charger block, iPad charger block, have held down both buttons for a hard restart for over 30 seconds but it always comes back to that stupid squiggly line battery icon. It does show the green lightning cable when charged to power but I can’t escape this screen.

Apple is continuing to grow in disappointments lately. Question marked as ★ Helpful Jan 18, 2017 11:52 AM in response to DSchaefer I just bought a second hand I watch sport. When I went to charge it, it has the green Question marked as ★ Helpful Jul 21, 2016 9:09 AM in response to DSchaefer This is not a charging issue but an error.

1. Apple has said before this may mean your watch needs to be repaired.
2. I’m dealing with this now and no amount of charging is fixing this error.
3. Question marked as ★ Helpful Nov 8, 2016 12:01 PM in response to DSchaefer This one is easy.
4. Because the battery in the iWatch has drained to very low and the USB plug that comes with the iwatch does not produce enough Amp to jump-start the charging process.

So, by using an ipad or any greater than 2 Amp USB charger to charge your iWatch will solve the problem. Once you attached the connector to the iWatch, you will see the Apple Logo. Once it has reached enough battery level, it will start. Question marked as ★ Helpful Oct 8, 2015 8:09 AM in response to DSchaefer That indicates that your watch battery is very low and needs to be charged.

All plastic wrapping has been removed from both ends and both sides of the charging cable (check closely on the head of the charger).The back of your Apple Watch and the concave head of the charging cable are each clean and dry (clean them with a lint-free cloth and retry).The charging head is directly aligned with the back of the watch and is touching it fully (some stands might hinder this).You are using only the genuine Apple Magnetic Charging Cable.When plugging into mains power:

You are using a genuine Apple USB Power Adapter.Besides the adapter that is supplied with the watch, the cable can also be used with the Apple 5W (iPhone) or 12W (iPad) USB Power Adapter – test with these if you have them.

When charging via USB, ensure that:

You use a USB 2.0 or 3.0 port.The computer remains on and awake.The cable is plugged directly into the computer (not into, for example, an external keyboard).

If your Apple Watch is out of battery power, you may need to wait for a few minutes before the green lightning bolt appears (confirming that charging has started).

Check your battery and charge your Apple Watch – Apple Support 7 replies Question marked as ★ Helpful Oct 8, 2015 8:09 AM in response to DSchaefer That indicates that your watch battery is very low and needs to be charged. Check that:

All plastic wrapping has been removed from both ends and both sides of the charging cable (check closely on the head of the charger).The back of your Apple Watch and the concave head of the charging cable are each clean and dry (clean them with a lint-free cloth and retry).The charging head is directly aligned with the back of the watch and is touching it fully (some stands might hinder this).You are using only the genuine Apple Magnetic Charging Cable.When plugging into mains power:

You are using a genuine Apple USB Power Adapter.Besides the adapter that is supplied with the watch, the cable can also be used with the Apple 5W (iPhone) or 12W (iPad) USB Power Adapter – test with these if you have them.

When charging via USB, ensure that:

You use a USB 2.0 or 3.0 port.The computer remains on and awake.The cable is plugged directly into the computer (not into, for example, an external keyboard).

If your Apple Watch is out of battery power, you may need to wait for a few minutes before the green lightning bolt appears (confirming that charging has started).

Check your battery and charge your Apple Watch – Apple Support Oct 8, 2015 8:14 AM in response to DSchaefer After charging (allow at least 2.5 hours for a full recharge), your watch may still be in Power Reserve mode. To turn your watch back on: press and hold the side button until you see the Apple logo and wait for your watch to restart.

1. Question marked as ★ Helpful Jul 21, 2016 9:09 AM in response to DSchaefer This is not a charging issue but an error.
2. Apple has said before this may mean your watch needs to be repaired.
3. I’m dealing with this now and no amount of charging is fixing this error.
4. Jul 21, 2016 9:23 AM in response to Peloquin1981 Peloquin1981 wrote: This is not a charging issue but an error,

It is normal for that symbol to be shown when the battery charge has reached a very low level. It does not necessarily indicate a faulty product, even when charging has already been attempted. If the watch cannot be charged successfully, it is certainly possible that the cause may be a fault with one or more of the components (USB power adapter, charging cable or watch).

Contact – Official Apple Support https://twitter.com/applesupport http://www.apple.com/retail/geniusbar/

To check your warranty status (the serial number is on the back of your watch): https://checkcoverage.apple.com/ Question marked as ★ Helpful Nov 8, 2016 12:01 PM in response to DSchaefer This one is easy. Because the battery in the iWatch has drained to very low and the USB plug that comes with the iwatch does not produce enough Amp to jump-start the charging process.

So, by using an ipad or any greater than 2 Amp USB charger to charge your iWatch will solve the problem. Once you attached the connector to the iWatch, you will see the Apple Logo. Once it has reached enough battery level, it will start. Question marked as ★ Helpful Jan 16, 2017 12:32 PM in response to DSchaefer My watch does this as well.

Have charged it with different chargers, different cables, my computer, an iPhone charger block, iPad charger block, have held down both buttons for a hard restart for over 30 seconds but it always comes back to that stupid squiggly line battery icon.

What do I do if my Apple Watch won’t force restart?

Do a Hard Reset of Your Apple Watch if it Won’t Force Restart – Just because your Apple Watch will not do a force restart, that doesn’t necessarily mean that a hard reset won’t work for it. It is sometimes that hard reset that galvanizes it back into action.

1. To do one, you’ll have to press and hold the Side button at the same time as the Digital Crown,
2. The Digital Crown functions the same as a Home button would on earlier versions of the iPhone.
3. The Apple logo should appear in the center of the watch’s display, at which time you can let go of the buttons.

The watch should now boot back up by itself, and hopefully, it will be fully operational again. If you didn’t have any luck with that fix, read on.

What is the red hazard on the Apple Watch?

If your Apple Watch displays an iPhone and a watch or a red “!” Your Apple Watch may display an animation asking you to move it closer to an iPhone if your watch is experiencing a problem that requires it to be updated or restored. You may also see a red exclamation mark on your watch.

Make sure the iPhone is nearby. The iPhone needs to have iOS 15.4 or later, it needs to be connected to Wi-Fi* with Bluetooth turned on and it needs to be unlocked. Put your Apple Watch on its charger. Double-click the side button (the button below the circular Digital Crown) on your Apple Watch. Follow the steps that appear on the iPhone.

* If these steps don’t work, check your Wi-Fi. Try using a 2.4 GHz network instead of 5 GHz, and make sure you’re not on a captive or 802.1X network. In some instances, your Apple Watch may display a red exclamation mark. If this happens, double-click the side button, then follow the steps above. to set up a mail-in repair if your Apple Watch continues to display a red exclamation mark. : If your Apple Watch displays an iPhone and a watch or a red “!”

What is the red power symbol on my Apple Watch?

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question. my watch is locked up and only displays a red lightning bolt and the time. how do I unlock? Apple Watch Series 2 Posted on Jan 13, 2017 7:35 AM Hi Apple Watch displays the time and a red lightning bolt – and cannot be used for any other functions – when it has entered into Power Reserve mode, which happens automatically when the battery reaches a low charge level.

What is the snake game on the Apple Watch?

You are using an outdated browser. Please upgrade your browser to improve your experience. Paste this code into your website: Customize Play the classic Snake game on your Apple Watch! Snake for Watch is one of the first games for the Apple Watch (just like it was one of the first games on the PC in late 1970s).

• It uses an innovative way to create pixels and enable simple game playing on the Apple Watch.
• You are a red snake, with an appetite for green dots.
• Each green delight makes you longer.
• Avoid the white dots, and don’t bite your own tail! Use the arrow buttons to steer left or right.
• Force touch (long tap) the Apple Watch screen to pause the game and choose to Resume or Restart.

Play the app on your Apple Watch, and use your iPhone to select the level and to submit your highscores to Game Center!

What is the red alert on Apple Watch?

Page 6 – Apps send notifications to keep you informed—meeting invitations, messages, and Activity reminders are just a few examples. Your Apple Watch displays notifications as they arrive, but if you don’t read one right away, it’s saved so you can check it later.

1. If you hear or feel a notification, raise your wrist to view it.
2. Turn the Digital Crown to scroll to the bottom of the notification, then tap a button there. You can also tap the app icon in the notification to open the corresponding app.
3. To clear a notification, swipe down on it. Or scroll to the bottom of the notification, then tap Dismiss.

If you don’t respond to a notification when it arrives, it’s saved in Notification Center. A red dot at the top of your watch face shows you have an unread notification. To view it, follow these steps:

1. From the watch face, swipe down to open Notification Center. From other screens, touch and hold the top of the screen, then swipe down. Note: You can’t open Notification Center when viewing the Home screen on your Apple Watch. Instead, press the Digital Crown to go to the watch face or open an app, then open Notification Center.
2. Swipe up or down or turn the Digital Crown to scroll the notifications list.
3. Tap the notification to read or respond to it.

To clear a notification from Notification Center without reading it, swipe it to the left, then tap X. To clear all notifications, firmly press the display, then tap Clear All. If you, tap a group to open it, then tap a notification. By default, the notification settings for the apps on your Apple Watch mirror the settings on your iPhone.

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap Notifications.
3. Tap the app (for example, Messages), tap Custom, then choose an option. Options may include:
   • Allow Notifications: The app displays notifications in Notification Center.
   • Notifications Off: The app sends no notifications.
   • Send to Notification Center: Notifications are sent directly to Notification Center without your Apple Watch making a sound or displaying the notification. Apps that support direct delivery to Notification Center include Activity, Breathe, Calendar, Mail, Messages, Podcasts, Reminders, and Wallet.

You can also manage notifications preferences directly on your Apple Watch by swiping left on a notification and tapping, Options may include:

• Deliver Quietly: Notifications are sent directly to Notification Center without your Apple Watch making a sound or displaying the notification. To see and hear these notification alerts again, swipe left on a notification, tap, then tap Deliver Prominently.
• Turn Off on Apple Watch: The app sends no notifications.

For each app on your Apple Watch that supports notifications, you can choose how notifications are grouped.

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap Notifications.
3. Tap an app, tap Custom, then tap Notification Grouping. Options include:
   • Off: Notifications aren’t grouped.
   • Automatically: Your Apple Watch uses information from the app to create separate groups. For example, News notifications are grouped by the channels you follow—CNN, Washington Post, and People,
   • By app: All the app’s notifications are grouped.

Touch and hold the bottom of the screen, swipe up to open Control Center, then tap, You still feel a tap when a notification arrives. To prevent sound and taps, touch and hold the bottom of the screen, swipe up to open Control Center, then tap, Tip: When you get a notification, you can quickly mute your Apple Watch by resting the palm of your hand on the watch display for at least three seconds.

• You’ll feel a tap to confirm that mute is on.
• Make sure you turn on Cover to Mute in the Apple Watch app on your iPhone—tap My Watch, then go to Sounds & Haptics.
• When you raise your wrist to see a notification, you see a quick summary, then full details a few seconds later.
• For example, when a message arrives, you see who it’s from first, then the message appears.

To stop the full notification from appearing unless you tap it, follow these steps:

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap Notifications.
3. Turn on Notification Privacy.

: See and respond to notifications on Apple Watch