Contents
- 0.1 Why does my Switch have no power?
- 0.2 Will the battery get damaged if the Switch is always in its dock?
- 1 Why wont my Switch turn on even after charging?
- 2 Is it bad if your Switch dies?
- 3 How long does it take to revive a dead Nintendo Switch?
- 4 How do you fix an unresponsive Switch?
- 5 How do I know if my Switch is getting power?
- 6 Why is my Switch stuck on the dead screen?
- 7 Is it OK to leave switch docked?
Why does my Switch have no power?
Situation Not Resolved: – If the issue persists using a second AC adapter, or if another one is unavailable, the Nintendo Switch console will need to come in for repair.
For testing purposes, be sure to include the AC adapter and the dock.
Please click here to begin the repair process.
- Hold down the POWER Button for twelve seconds to force the system to shut down, then power it on again.
- Reset the AC adapter by leaving it unplugged from both ends for at least 30 seconds.
- While performing this step, verify you are using the Nintendo Switch AC adapter (model No. HAC-002) and check for any cuts, kinks, frayed cables, etc.
- If any damage is found, or if a different charger is being used, replacing it with the correct accessory may resolve the problem.
- While performing this step, verify you are using the Nintendo Switch AC adapter (model No. HAC-002) and check for any cuts, kinks, frayed cables, etc.
- Connect the AC adapter to the system and directly to a wall outlet.
Will the battery get damaged if the Switch is always in its dock?
Inquiries About Leaving the Nintendo Switch Console Docked Applies to: Nintendo Switch Family, Nintendo Switch, Nintendo Switch – OLED Model
The Nintendo Switch console can be left in the dock while not in use to ensure that it is fully charged.If you put the console in the dock or plug in the AC Adapter directly to charge before the battery is completely spent, it will only count as a partial charging cycle.Leaving the console on the dock or plugged in directly with the AC adapter overnight, or past the point where the battery is fully charged will not cause harm to the battery.
: Inquiries About Leaving the Nintendo Switch Console Docked
Why wont my Switch turn on even after charging?
Check if the device is charging – 
Curtis Joe / Android Authority Most likely your Switch isn’t turning on because it’s out of juice. Test your charger and cable with another device if you can, and look closely for torn or frayed cords. You’ll need a replacement if things are damaged. If you’re planning to get a third-party charger, ensure it meets Nintendo’s minimum requirements.
The Switch supports over USB-C, and charges quickly with an 18W charger. We recommend getting a, however, to fast-charge whenever possible. You’ll need at least a 45W charger for the official Switch dock. If you normally plug your Switch into the dock to charge, it could be a placement issue. The green LED indicator will light up for a few seconds when you insert the console correctly.
That light isn’t a charging indicator though, so check whether it’s a problem with the dock by plugging your charger directly into the console. If the Switch powers up, you’ll need to replace your dock. Once you’re able to charge your Switch again, wait a few minutes, then press the power button at the top of the Switch to turn it on.
How long does a dead Switch take to charge?
Information: –
The Nintendo Switch console takes approximately 3 hours to fully charge when the console is powered off or in sleep mode. Charging time will be longer if the console is in use.Once fully charged, the battery duration for the console varies depending on model and on the software application and functions being used.
For Nintendo Switch – OLED Model with a serial number that starts with “XT”, the battery life is approximately 4.5 to 9 hours.For Nintendo Switch consoles with a serial number that starts with “XK”, the battery life is approximately 4.5 to 9 hours.For Nintendo Switch consoles with a serial number that starts with “XA”, the battery life is approximately 2.5 to 6.5 hours.For Nintendo Switch Lite, the battery life is approximately 3 to 7 hours.
How do I know if my dead Switch is charging?
Is the charging indicator displayed? – Turn on your console and look for the charging icon at the top-right of the screen. * The light on the dock is not a charging indicator. (It comes on when there is video output to a TV screen.) 
Is it bad if your Switch dies?
Every time the battery is discharged, the chemistry deteriorates just a little bit more than when it was first assembled. Running down to 50% means you get some usage out of the battery while only using about half a charging cycle (full discharge and recharge).
How long does it take to revive a dead Nintendo Switch?
Give your Switch time to charge – The Switch may not work properly with a third-party charger. Steven John/Business Insider If your Switch’s battery died, and you plugged it in only for nothing to happen, don’t worry — this is normal. When a Switch’s battery is fully drained, it can take several minutes to turn back on, even if connected to its charger.
Give it up to a few hours to charge and restart. If you haven’t used your Switch in days or weeks since its battery drained, it can take even longer to resuscitate, up to 12 to 24 hours. If the system fails to turn back on even after the given amount of time, ensure the Switch is properly connected to its dock or USB-C charger.
Connecting the USB-C cable is a more consistent charging method, since you can directly see whether it’s connected or not.
Why can’t i see my Nintendo Switch screen?
Great! Now that we’ve verified the console works in handheld mode, let’s check the TV setup. –
- With the console still undocked, ensure it has the latest system update installed.
- Connect the AC adapter to the dock and directly to a wall outlet, then connect the HDMI cable to the dock and directly to an HDMI port on the TV set. Important: If a different device is being used such as a sound bar, a home theater system, or a video adapter, remove them temporarily.
- Power on the TV and place the console in the dock with the console screen facing in the same direction as the front panel on the dock.
- If a protective case is being used, be sure to remove it before docking the console.
Important: If a different device is being used such as a sound bar, a home theater system, or a video adapter, remove them temporarily. 
It seems there is an issue with the console. In order to resolve this, let’s continue troubleshooting for No Power,
- Verify you are using the correct input on the TV set.
- If you are using a dock with a built-in LAN port, update the dock to the latest firmware,
- Lower or adjust the TV Resolution settings on the console,
- Use a different HDMI port on the TV.
- Use a different HDMI cable.
- Use a different TV set.
- If possible, use a different dock.
- If the console works using a different dock, the original dock will need to be repaired. Important: For assistance with the dock, please contact us for additional support.
How do you fix an unresponsive Switch?
Your console may have frozen. – If your console has frozen and is unresponsive, press and hold the POWER Button for at least 12 seconds to turn the console completely off. Then press the POWER Button again to turn the console on. 
* A Nintendo Switch is pictured here. There are differences with the Nintendo Switch Lite. If none of the above methods resolve your issue, please contact your local customer service centre. : My console’s screen is unresponsive and there is no movement on it. What should I do?
How do I know if my Switch is getting power?
Test for Power – Remove the screws on the switch cover plate, and pull off the cover plate to expose the switch wiring. Without touching any wires, test each wire in the electrical box with a non-contact voltage tester. Also, test each of the side terminals on the switch by touching it with the tip of the tester.
Can a Nintendo Switch be repaired?
Factory Service Repair – Terms & Conditions Applies to: Nintendo Switch Family, Nintendo Switch, Nintendo Switch Lite, Nintendo Switch – OLED Model, New Nintendo 3DS XL, New Nintendo 2DS XL, Nintendo 2DS Nintendo’s Factory Service Repair, which is defined as the repair (or replacement, at Nintendo’s discretion) of Nintendo systems, is available for systems within their original manufacturer’s warranty or repair warranty period.
- Factory Service Repair may also be available for a fee for systems where the manufacturer’s warranty or repair warranty has expired, or where the issue with the system is not covered under warranty.
- Please visit the to determine what options may be available for your system.
- If you send in your system for service under the original manufacturer’s warranty or the repair warranty and it is determined that the issue was caused by something other than a manufacturer’s defect, payment will be required before Nintendo will repair your system.
Two attempts will be made to contact you to arrange for payment. If we are unable to contact you, your system will be returned to you unrepaired. Nintendo will not repair any product found to be counterfeit or altered (e.g. software modification, hardware modification, tampered with, etc.).
- Any system identified as such will be returned as-is.
- In addition, Nintendo reserves the right to refuse requests for repairs that, in Nintendo’s sole discretion, are fraudulent.
- If a product cannot be repaired, it may be replaced with a Factory Certified System.
- Factory Certified systems must meet functional new product specifications.
They may be built with new housing, or may include minor cosmetic defects (e.g. scratches, dents). to view the manufacturer’s warranty text.
Why is my Switch stuck on the dead screen?
The Nintendo Switch screen is black and isn’t responding to input
The console may be frozen. There is a chance that the console has frozen with a black screen. Look at the console in a darkened room and see if any light is coming from the screen. If so, the console has frozen. Hold the POWER Button for 12 seconds or more to turn the console off.
Then, press the POWER Button to turn the console on again. : The Nintendo Switch screen is black and isn’t responding to input
Why did my Switch freeze?
Fully charge your device – A frozen Switch could be the result of a low battery. Connect your device to the charger, and allow it to charge for a few hours before trying to start the game again.
Is it OK to leave switch docked?
Nintendo says ‘relax’ – 
Vantage_DS/Shutterstock The reason overall battery life can shrink as time goes on is because these power sources often have a particular number of charging cycles in them before they start to lose effectiveness. And every time a device goes from zero to full, that counts as one complete cycle.
Eventually, it will hit that limit, and you’ll start to notice that your device may not hold a full charge for as long as it used to. But if you’ve been leaving your Switch in its dock for extended periods of time, don’t panic. Nintendo has directly stated that the Switch’s battery will not degrade or take damage when the console stays docked past the point of a full charge.
This does make sense seeing as the Switch was originally designed as a hybrid console that could work either as a more typical connected-to-the-TV affair or as a portable handheld device. If staying plugged in damaged the battery it would undercut its entire gimmick.
How long do switch batteries last for?
How Long Does the Battery Charge Last? Applies to: Nintendo Switch Family, Nintendo Switch, Nintendo Switch Lite, Nintendo Switch – OLED Model Important: As with most lithium-ion batteries, the console battery life will gradually decrease over time. After about 800 charge cycles, the console battery life will decrease to about 80% compared to the battery on a new console.
The Nintendo Switch console takes approximately 3 hours to fully charge when the console is powered off or in sleep mode. Charging time will be longer if the console is in use. Once fully charged, the battery duration for the console varies depending on model and on the software application and functions being used.
For Nintendo Switch, model number: HAC-001, the battery life is approximately 2.5 to 6.5 hours. For Nintendo Switch, model number: HAC-001(-01), the battery life is approximately 4.5 to 9 hours. For Nintendo Switch Lite, model number: HDH-001, the battery life is approximately 3 to 7 hours. For Nintendo Switch – OLED Model, model number: HEG-001, the battery life is approximately 4.5 to 9 hours.
: How Long Does the Battery Charge Last?
Is it OK to leave the switch in sleep mode?
Leaving switch in sleep mode forever? You’re browsing the GameFAQs Message Boards as a guest. for free (or if you already have an account) to be able to post messages, change how messages are displayed, and view media in posts.
| You cant turn the console off with a controller, so you have to manually long press the power button and then use the controller to select the power off option. Weird design decision aside, is it bad to leave the switch in sleep mode forever? Mine’s always docked and I’ve left it on sleep mode for 3 months now, going on 4. |
| I’ve left mine in sleep made for years |
| Dark_guyver posted. I’ve left mine in sleep made for years Wow and no problems? What about leaving a game on sleep mode with the system instead of closing the application? You think it’s bad? In the hundred plus hours I played zelda, it only crashed once on me but I don’t know what triggered it so wanted to ask here. |
| I don’t think there’s anything wrong with keeping it in sleep mode. I only manually turn it off when I’m playing un-docked. I gave you the chance of aiding me willingly, but you. have elected. the way of. PAIN |
| The console is designed to be left in sleep mode, it never charges the actual battery to 100%. |
| Noumas posted. Wow and no problems? What about leaving a game on sleep mode with the system instead of closing the application? You think it’s bad? In the hundred plus hours I played zelda, it only crashed once on me but I don’t know what triggered it so wanted to ask here. Yep, no problems here. I’ve had the system for about 2 1/2 years. |
| Shouldn’t be a problem to leave it in sleep forever. I occasionally restart only because I’m paranoid about memory leaks. |
| The only time my Switch gets turned off is when I update it. I always leave it with a game on too. It’s one of the things I love about handhelds. I never leave it in the dock though. I’ve had a lot of problems with that in the past, which may or may not have already been patched since I don’t encounter them anymore.Speaking of which. you should update your Switch man. Unless you’re running homebrew, then okay. |
| Some games have issues if left open in sleep mode, but there’s no issue with the console itself being left in sleep mode, it’s pretty much what it’s designed for. And it’ll reboot with every system update anyway, so it’ll get that occasional reboot regardless. |
Leaving switch in sleep mode forever?
Why can’t i see my Nintendo Switch screen?
Great! Now that we’ve verified the console works in handheld mode, let’s check the TV setup. –
- With the console still undocked, ensure it has the latest system update installed.
- Connect the AC adapter to the dock and directly to a wall outlet, then connect the HDMI cable to the dock and directly to an HDMI port on the TV set. Important: If a different device is being used such as a sound bar, a home theater system, or a video adapter, remove them temporarily.
- Power on the TV and place the console in the dock with the console screen facing in the same direction as the front panel on the dock.
- If a protective case is being used, be sure to remove it before docking the console.
It seems there is an issue with the console. In order to resolve this, let’s continue troubleshooting for No Power,
- Verify you are using the correct input on the TV set.
- If you are using a dock with a built-in LAN port, update the dock to the latest firmware,
- Lower or adjust the TV Resolution settings on the console,
- Use a different HDMI port on the TV.
- Use a different HDMI cable.
- Use a different TV set.
- If possible, use a different dock.
- If the console works using a different dock, the original dock will need to be repaired. Important: For assistance with the dock, please contact us for additional support.
Why is my Nintendo Switch stuck on logo screen?
Fully charge your device – A frozen Switch could be the result of a low battery. Connect your device to the charger, and allow it to charge for a few hours before trying to start the game again.
How long does a dead Switch take to turn on?
How Long Does the Switch Need to Charge Before It Turns On? – The battery will usually need at least a 1-percent charge before it turns on. A 1-percent charge should be available after 10-15 minutes of charging.